WIDE RANGE OF APPLICATIONS

Matrix UNI series allow printing directly onto the chosen substrate. Along with
exceptional results achieved on leather , wood and anodized aluminum. Matrix UNI printers cover materials like stone, diferent types of plastics, glass , ceramic and many others.
UNI technology allows a graphic image or sign to be printed directly on the wide range of materials and objects with
superb adhesion of ink directly from your digital file.
RIGHT SIZE FOR YOUR BUSINESS
Due to Matrix UNI wide range of applications you can choose between 4 standard table sizes.
Additionally to our customer satisfaction your printer can be customized in width and height according to your needs.

MATRIX UNI INK
Azon UNI
Matrix UNI printers use high-quality dye-ink (low viscosity gel). Standard configuration is CMYK+ LC LM LK LLK for achieving a wide spectrum of colors and providing a color vibrancy of any desired image or effect on the printed material.

INCREASED ADHESION
No drying time needed , once printed your product is ready for
further processing .

Vivid Colors
Due to special developed formula UNI ink provide vivid colors on almost any material .

highly flexible
Matrix UNI ink is providing outstanding flexibility even on materials like leather.

CONTI System
Each Matrix UNI printer is equipped with CONTI ink system [ Continues ink supply ]. CONTI allows for printer to be refilled with ink during the printing operation , which translate to zero time loss during the refill. Matrix UNI use 6 or 8 bulks with 500ml each.

MATRIX UNI SERIES INK SYSTEM Configuration
6x 500ml bulks CMYK + LC+LM
8x 500ml bulks CMYK + LC+LM+LB+LLB
[custom configurations are available]
RIP SOFTWARE
AZON RIP
With Azon RIP Software you are getting absolute control over your Matrix UNI printer.
Even the most complicated and creative ideas are just few clicks away from being printed.

Super precise colors
[ Print on artificial leather ]
With ink cost calculator you will have precise data abut ink cost for each graphic even before print.
Advanced profiling allows for optimum ink consumption while delivering perfect results.

Vivid colors
[ Print on marble ]
MAXIMUM PREFORMANCE
With full control over the printer user can easily switch between materials with no time lost for preparation .

Ink Amount Control
[ Print on Wood ]

Super Sharp print
[ Print on anodized aluminum ]

Dot size control
[ Print on balloons ]
COST CALCULATOR
With ink cost calculator you will have precise data about ink cost for each graphic even before its printed.
Advanced profiling allows for optimum ink consumption while delivering maximum quality results.
FEATURES
SELECTIVE VACUUM
All printers within Matrix UNI series are equipped with vacuum tables. Vacuum tables are separated into zones which can be easily turned on and off depending on size of the material.
MATRIX
VACUUM
ZONES

Add Your Heading Text Here
LOOP MODE
Feature which will enable you to make precision calculation
how much time you need to create certain amount of required
products. Simply send amount of copy’s you need form RIP software to and turn on loop mode. When printer is finished with the first substrate it will move gantry to second one.
While second substrate is printed you can safely remove first
one and replace it with blank one. When the second substrate is done gantry will go back first one. This will continue until all copy’s you send form RIP are printed.

IR LAMPS
With the adjustable IR Lamps UNI technology is pushed even step further . IR lamps are used to preheat material before printing , which will change the surface tension and allow for better ink absorption . Once cooled pores of the material will close and trap the ink inside . Matrix UNI have adjustable IR lamp system which means you can adjust heat output to be the right one for each material you need to print .

MATRIX UNI 1206 / 1806 / 1211 / 2511
SUBSTRATE | |
PRINT AREA | 590 mm x 1200 mm / 590 mm x 1800 mm / 1100 mm x 1200 mm / 1100 mm x 2500 mm 23.22″ x 47.24″ / 23.22″ x 70.86″ / 43.30″ x 47.24″ / 43.30″ x 98.42″ |
ACCEPTABLE MEDIA | 700 mm x 1900 mm / 700 mm x 2500 mm / 1200 mm x 1900 mm / 1200 mm x 3200 mm 27.55″ x 74.80″ / 27.55″ x 98.42″ / 47.24″ x 74.80″ / 47.24″ x 125.98″ |
CLEARANCE | 0,5-420 mm / 0,01″-16.53″ |
MAX WEIGHT | 50 kg/m2 (110.2 lb./ft2), non-concentrated load |
FIXTURE [VACUUM] | 3 ZONES TABLE , 1 pump / 6 ZONES TABLE , 2 pumps |
MATERIAL TYPE INDUSTRIAL | LEATHER |
MATERIAL TYPE PROMOTIONAL | PLASTIC PET, PE, PVC, PP, PS, PLA, PC, PMMA, POM, PA, ABS GLASS CERAMIC |
PRINT TECHNOLOGY | Ink-jet[On-demand piezo] |
DROP SIZE | 3,5 – 21 picolitre |
PRINT RESOLUTION | 360 dpi 720 dpi 1080 dpi 1440 dpi 2880 dpi |
SPEED | 3,20 SqM/Hr 34.44SqFt/Hr / 3,66 SqM/Hr 39.39SqFt/Hr |
ABSOLUTE ACCURACY | +/- 0.01 (0.3 mm) or +/- 3% from specified print distance |
REPEATABILITY | +/- 0.008 (0.2 mm) or +/- 1% from specified print distance |
INK CONSUMPTION | CMYK LC LM LK LLK 9,68 ml/SqM |
INK | |
TYPE | AZON LAW Inks |
CURING | ADJUSTABLE IR LAMPS |
COLORS | CMYK LC LM LK LLK |
PRIMER | AZON LAW CERTIFIED COATINGS FOR LETAHER (MATTE & SHINE) |
SUPPLY SYSTEM | 500ml INK TANKS |
INK AGITATION SYSTEM | White ink circulation using Azon Circulation Technology [ACT] |
SOFTWARE | |
RIP | AZON RIP 64 |
OPERATIONAL ENVIRONMENT | |
TEMPERATURE | +15°C to 30°C / 59F-86F |
HUMIDITY | 35-65% RH (non-condensing) |
POWER 220V/110V | |
STANDBY CONSUMPTION | 95 W |
MAX CONSUMPTION | 2,6 kW / 5 kW |
ASSEMBLED DIMENSIONS | |
(W×D×H) | 1330 x 2300 x 1150 mm / 1330 x 2900 x 1150 mm / 1850 x 2300 x 1150 mm / 1850 x 3600 x 1150 mm 52.36″ x 90.55″ x 45.27″ / 52.36″ x 114.17″ x 45.27″ / 72.83″ x 90.55″ x 45.27″ / 72.83″ x 141.73″ x 45.27″ |
WEIGHT | 250 kg – 551 lbs / 390 kg – 661 lbs / 270 kg – 705 lbs / 630 kg – 992 lbs |